Compatible Filters for Vent Axia MVHR

Vent Axia MVHR stands for Mechanical Ventilation with Heat Recovery, which is an energy-efficient ventilation system that provides fresh, filtered air while retaining heat from the outgoing stale air. The system uses filters to remove airborne contaminants and recovers heat from the exhaust air to reduce energy costs.

Vent Axia MVHR air filters are designed to remove airborne contaminants from the incoming fresh air before it is distributed throughout the building. The filters are available in different types and efficiencies, including G3, F7, and F8.

The frequency of Vent Axia MVHR air filter replacement depends on the environment and usage. Generally, it is recommended to replace the G3 filter every 3 months, the F7 filter every 6 months, and the F8 filter every 12 months.

Replacing Vent Axia MVHR air filters is a simple process that involves removing the filter unit, replacing the old filter with a new one, and reinserting the unit back into the MVHR system. It's important to follow the manufacturer's instructions and use the correct size and type of filter for your specific MVHR system.

Using Vent Axia MVHR air filters helps improve indoor air quality by removing airborne contaminants such as dust, pollen, and other allergens. The filters also help extend the lifespan of the MVHR system by preventing the buildup of dirt and debris. Additionally, using high-efficiency filters can help reduce energy costs by reducing the workload on the system.

Locate the control panel or interface of your Vent Axia Sentinel Kinetic unit. It is usually found on the front or side of the unit.

Look for the "Filter Reset" or "Reset" button on the control panel. It is typically labeled or indicated by a symbol.

Press and hold the "Filter Reset" or "Reset" button for approximately 5 to 10 seconds. Keep holding the button until you see the indicator light or display change or reset.

Release the button after the reset process is complete. The filter reset procedure may vary depending on the model of your Vent Axia Sentinel Kinetic unit, so please refer to the manufacturer's manual for specific instructions if necessary.

After resetting the filter, the unit should recognize that a new filter has been installed, and the filter replacement indicator should be cleared.

It's important to note that the reset process may differ slightly depending on the specific model and version of your Vent Axia Sentinel Kinetic unit. Therefore, referring to the manufacturer's manual or contacting Vent Axia's customer support for detailed instructions is always recommended for precise guidance.

You can also refer to Venta Axia's own manual here.